This is the Rust Board Support Package crate for the Vorago REB1 development board. Its aim is to provide drivers for the board features of the REB1 board
The BSP builds on top of the HAL crate for VA108xx devices.
Building an application requires the thumbv6m-none-eabi cross-compiler toolchain.
If you have not installed it yet, you can do so with
sh
rustup target add thumbv6m-none-eabi
This repository provides some example applications to show how the BSP is used. For example you can build the blinky example with
sh
cargo build --example blinky-leds
A jlink.gdb file is provided to allow flashing of the board from the command line.
Ensure that you have a suitable GDB application like arm-none-eabi-gdb or gdb-multiarch
installed first. On Windows, you can use xPacks.
On Linux, you can install gdb-multiarch from the package manager.
Install the JLink Tools.
Start the JLink GDB server with the GUI or from the command line. The device should be recognized automatically
Make sure to select an appropriate runner in the .cargo/config.toml file depending on which
GDB application you are using
Use
sh
cargo run --example blinky-leds
to flash the board. The debugger should stop at the start of the main.
The REB1 board features an on-board JTAG, so all that is required to flash the board is a
Micro-USB cable and an
You can debug applications on the REB1 board with a graphical user interface using VS Code with
the Cortex-Debug plugin.
Some sample configuration files for VS code were provided as well. You can simply use Run and Debug
to automatically rebuild and flash your application.
Coming Soon