Measure temperature and humidity with the Sensiron SHT20 sensor. - Temperature range: -40 to 125 C(-40 to 257 F) - Humidity range: 0 to 100 % RH - Temperature accuracy: ± 0.5% C - Humidity accuracy: ± 5% RH - Interface: I2C - Voltage range: 2.1 - 3.6 V
An SHT20 sensor in a plastic enclosure with a 1m length of cable.
The device uses the Qwiic Connect System for wiring, it's an easy-to-use, polarized, push-to-fit connector. No more mistaken connections or soldering header pins.
There is plenty of documentation on the specification, and setup of the sensor.
From the /rust folder, type cargo run. You may run into permission issues and need to run the executable with sudo. sudo ./target/debug/ufire_sht20_bin. You'll be presented with a > prompt. Type help and you'll get a list of commands you can run.
Visit uFire.co.