TCA9535 I/O Expander embedded-hal i2c driver

From the datasheet:

The TCA9535is a 24-pin device that provides 16 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus or (SMBus) protocol. The device can operate with a power supply voltage ranging from 1.65 V to 5.5 V.

Usage

Include the library as a dependency in your Cargo.toml

[dependencies.tca9535] version = "0.1"

Use embedded-hal implementation to get the i2c bus for the chip then create the handle.

```rust use tca9535::{Tca9535, Address, Port};

// Obtain an i2c bus using embedded-hal // let mut i2c = ...;

// Note that the handle does not capture the i2c bus // object and that the i2c bus object must be supplied for each method call. // This slight inconvenience allows sharing the i2c bus between peripherals. let gpio = Tca9535::new(&i2c, Address::ADDR_0x20);

// Set all outputs low gpio.clear_outputs(&mut i2c)?;

// Set port P01 and P05 as inputs and the rest as outputs. gpio.write_config(&mut i2c, Port::P01 | Port::P05)?;

// Read pin input logic levels let inputs = gpio.read_inputs(&mut i2c)?;

// Do something if port P01 is high: if inputs & Port::P01 { // ... } ```