stm32hal

This project provides a Rust HAL (hardware abstraction layer) for all STM32 micro-controllers.

What it is?

This crate is an experiment into providing a hardware abstraction layer supporting all the devices and peripherals found across the stm32 micro-controller families.

It use the stm32ral (register access layer) to configure hardware.

Please consider trying it out and contributing or leaving feedback!

What it provides?

• Support for multiple stm32 devices.
• A library tailored to the stm32 device you want to use.
• Exposure of the peripherals and functionalities a given stm32 device support.
• High-level hardware description.
• Support for the RCC and GPIO peripherals out of the box.

Using it in your own crates

In your Cargo.toml, depends on exact device you want to use. Replace stm32f051R8T6 with the device chip name. See [Supported Devices][] for the full list.

toml [dependencies.stm32hal] version = "0.1.0" features = ["stm32f051R8T6"]

At the top level of the stm32hal crate, there is a module for each peripheral type, such as stm32hal::gpio. Inside each peripheral module there is a struct for each supported peripheral, such as stm32hal::gpio::GPIOC.

As this crate is generated at build time, access the documentation with: cargo doc --open

Quick Example

``rust // First you musttake()the peripheral instance. // This returnsSome(hal)if that instance is not already taken; otherwise it returnsNone`. // This ensure that no other code can be simultaneously accessing the peripheral, // which could lead to race condition. let mut rcc = stm32hal::rcc::RCC::take().unwrap();

// Some peripheral depends on other peripheral before they can be used. // Use the take_from() to get the peripheral instance. // Here the gpio clock line need to be enabled by the RCC peripheral. let gpioa = stm32hal::gpio::GPIOA::take_from(&mut rcc).unwrap();

// Get a pin. let pin = gpioa.pa1;

// ... Do something with gpio pins...

// Give the pin back to its gpio. gpioa.pa1 = pin;

// When done with a peripheral that depends on other, use release_to() to release it. gpioa.release_to(&mut rcc);

// When done with peripheral release() it. rcc.release(); ```

See the documentation for more examples.

Supporting a new device

The device are described in a <device>.yaml file inside the devices/ folder. A device file can support multiple device part.