Rust Ethernet Driver for STM32F* microcontrollers

Supported microcontrollers

• STM32F4xx
• STM32F7xx

Please send pull requests.

Building Examples

cargo build --example="pktgen" --features="stm32f429" cargo build --example="ip" --features="stm32f429 smoltcp-phy log smoltcp/socket-tcp smoltcp/socket-icmp smoltcp/log smoltcp/verbose"

Usage

Add to the [dependencies] section in your Cargo.toml: rust stm32f4xx-hal = { version = "0.8.3", features = ["stm32f429"] } stm32-eth = { version = "0.2.0", features = ["stm32f429"] } or rust stm32f7xx-hal = { version = "0.2.0", features = ["stm32f767"] } stm32-eth = { version = "0.2.0", features = ["stm32f767"]}

In src/main.rs add: ```rust use stm32_eth::{ hal::gpio::GpioExt, hal::rcc::RccExt, stm32::Peripherals, };

use stm32_eth::{Eth, RingEntry};

fn main() { let p = Peripherals::take().unwrap();

let rcc = p.RCC.constrain();
// HCLK must be at least 25MHz to use the ethernet peripheral
let clocks = rcc.cfgr.sysclk(32.mhz()).hclk(32.mhz()).freeze();

let gpioa = p.GPIOA.split();
let gpiob = p.GPIOB.split();
let gpioc = p.GPIOC.split();
let gpiog = p.GPIOG.split();

let eth_pins = EthPins {
    ref_clk: gpioa.pa1,
    md_io: gpioa.pa2,
    md_clk: gpioc.pc1,
    crs: gpioa.pa7,
    tx_en: gpiog.pg11,
    tx_d0: gpiog.pg13,
    tx_d1: gpiob.pb13,
    rx_d0: gpioc.pc4,
    rx_d1: gpioc.pc5,
};

let mut rx_ring: [RingEntry<_>; 16] = Default::default();
let mut tx_ring: [RingEntry<_>; 8] = Default::default();
let mut eth = Eth::new(
    p.ETHERNET_MAC,
    p.ETHERNET_DMA,
    &mut rx_ring[..],
    &mut tx_ring[..],
    PhyAddress::_0,
    clocks,
    eth_pins,
)
.unwrap();
eth.enable_interrupt();

if let Ok(pkt) = eth.recv_next() {
    // handle received pkt
}

eth.send(size, |buf| {
    // write up to `size` bytes into buf before it is being sent
}).expect("send");

} ```

[smoltcp] support

Use feature-flag smoltcp-phy