soil_moisture1.2c6

soil moisture library for the esp32 series, was tested currently only on esp32 c6. If you managed to make it run on your esp32 please leave a commit/dm me so ill add it to the tested esp32. Please note that the values are for my own sensor (dry,wet) readings, you can commit yours or change yourself, i will probably add support for custom later example of usage:

``rust use esp_idf_sys as _; // If using thebinstartfeature ofesp-idf-sys`, always keep this module imported use espidfhal::{adc::{AdcDriver, config::Config, Atten11dB, AdcChannelDriver}, prelude::Peripherals, gpio::{Gpio5}, delay::Delay, }; use log::*; use soilmoisturehal::SoilMoisture;

fn main() {

// It is necessary to call this function once. Otherwise some patches to the runtime
// implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
esp_idf_sys::link_patches();
// Bind the log crate to the ESP Logging facilities
esp_idf_svc::log::EspLogger::initialize_default();

info!("program starts");

let peripherals = Peripherals::take().unwrap();

let mut soil_moisture = SoilMoisture::new(peripherals.adc1, peripherals.pins.gpio5).unwrap();

//let mut adc = AdcDriver::new(peripherals.adc1, &Config::new().calibration(true)).unwrap();
/*let mut adc_pin: esp_idf_hal::adc::AdcChannelDriver<'_, Gpio5, Atten11dB<_>> =
    AdcChannelDriver::new(peripherals.pins.gpio5).unwrap();*/
//let x = MyStruct::new(adc);



loop
{
    //println!("ADC value: {}", adc.read(&mut adc_pin).unwrap());
    println!("Moisture level: {}", soil_moisture.get_moisture_precentage().unwrap());
    Delay::delay_ms(1000);
}

} ```