SerialFrame

Simple serialport frame reciever, that asynchrounous sends chunks of bytes over an mpsc channel. the chunks are sent with the chosen delimiter.

Can be used to recieve lines over serialports in an asynchronous manner, or to recieve cobs messages

Example

```rust use serialport::*;

use serial_frame::SerialFrameSender;

use std::sync::mpsc::*; use std::time::Duration;

use simple_logger;

fn main() { simplelogger::initwith_level(log::Level::Debug).unwrap();

let mut settings: SerialPortSettings = Default::default();
settings.timeout = Duration::from_millis(100);
let baudrate = 115200;
settings.baud_rate = baudrate;
let serialport = serialport::open_with_settings("/dev/ttyACM0", &settings).unwrap();

// Send chunks that all end with a newline
let linesend = SerialFrameSender::new(b'\n', serialport);
let (tx, rx) = channel();
let linestop = linesend.start(tx).unwrap();

// Recieve the lines, stop if timeout
while let Ok(line) = rx.recv_timeout(Duration::from_secs(2)) {
    // Inspect the received line
    match line {
        Ok(line) => {
            println!("line is: {}", String::from_utf8_lossy(&line));
        }
        Err(e) => {
            // An error in the sender has occured, the thread will be dead here
            println!("Error: {:?}", e);
        }
    }
}
// This will end the thread if it not stopped
let e = linestop.stop();
println!("Stop: {:?}", e);

}

```