scalpel

A scalpel and stitch tool for binaries. Maybe also a signing tool, maybe.

Snip around, stitch up or graft binaries

This is mostly used for the case where parts of the binary need to be extracted or replaced.

Use Cases

• stance firmware into pieces from an all-in-one blob

  bash scalpel stance --range 0..4Ki --output bootloader.bin firmware.bin scalpel stance --range 4Ki+241664 --output part_A.bin firmware.bin --file-format bin scalpel stance --range 282624+241664 --output part_B.bin firmware.hex --file-format hex

• stitch firmware pieces together such as bootloader and application

  bash scalpel stitch --binary tmp/test_bytes --offset 0 --binary tmp/test_bytes --offset 2048 --fill-pattern zero --output stitched.bin scalpel stitch --binary tmp/test_bytes --offset 2Ki --binary tmp/test_bytes --offset 0 --fill-pattern one --output stitched.hex --file-format hex scalpel stitch --binary tmp/test_bytes --offset 2058 --binary tmp/test_bytes --offset 10 --fill-pattern random --output stitched.bin

• replace a section with a new file

  bash scalpel graft --range 1Ki..2Ki --replace tmp/test_cut_out --output cut tmp/test_bytes scalpel graft --range 0..2Ki --replace tmp/test_cut_out --output cut tmp/test_bytes --file-format bin scalpel graft --range 1Ki+1Ki --replace tmp/test_cut_out --output cut tmp/test_bytes scalpel graft --range 1Ki+1Ki --replace tmp/test_cut_out --output cut tmp/test_bytes.hex --file-format hex

Features

• [x] cut off a binary at specific start and end/size
• [ ] Handle endianness of checksums properly
• [x] Replace parts (i.e. cert files or non volatile memory and/or sections)
• [x] Allow hexadecimal input
• [x] Allow multipile input scales (K = 1000, Ki = 1024, M = 1e6, Mi = 1024*1024, ...)
• [ ] Add verifier option for alignment to given sector/page size
• [x] Allow files in IntelHex format for in- and output

Common / Hints

• You need the extracted binary as include? Use xxd -i sliced.bin > sliced_binary.h to create a header file out of the result.

• Convert RSA keys in .pem format to pkcs8 format via openssl (see ring doc [doc-ring] ), openssl supports Ed25519 algorithm currently only on master

  bash openssl pkcs8 -toppk8 -nocrypt -outform der -in [key.pem] > [pkcs8_key.pk8]

• Generate valid Ed25519 Keypair use small tool from ring author:

  bash cargo install kt kt generate ed25519 --out=FILE