"rrdpit" is a small little tool that can be pointed at a directory on your system, and produce RPKI RRDP (RFC 8182) notification, snapshot, and delta files. You will need to use an http server of your preferred flavour to deliver these files to the world.
This tool is designed to be run in between publication runs, but not during. As part of the syncing process the source directory is crawled recursively. If there are any changes made to the paths during the sync then this can result in RRDP snapshots and delta containing inconsistent repository state.
This situation would resolve itself when rrdpit runs again while there are no changes being made, but it could cause errors and noise for RPKI validators.
So, the best option is to run this when it is known that there will be no changes made to the source. E.g. when a non RRDP capable publication server knows that it's done writing content, it could trigger rrdpit, and wait with writing new content until rrdpit is done.
Of course, the safest option might still be to use an RRDP capable RPKI Publication Server instead so this extra helper tool would not be needed.
Add option to limit the maximum number of deltas using --max_deltas. Keeping too many deltas will result in large RRDP notification files if the individual deltas are much smaller than the snapshot. This can have a big impact on the server if many RPs request a large notification file.
The default limit is set to 25. This value will work well if rrdpit runs every minute as it's more than twice the number of the typical RP fetch interval (10 minutes). If rrdpit runs less frequently then this number can be lowered. Essentially, one should keep enough deltas so that returning RPs never need to load the snapshot.
The minimum value of this setting is 1.
Ignore hidden files in the source directory. I.e. exclude any and all files and folders starting with a '.' character.
Initial release.
Assuming you have rsync and the C toolchain but not yet Rust, here’s how you get rust installed.
bash
curl https://sh.rustup.rs -sSf | sh
source ~/.cargo/env
If you have an old version of rust installed you may have to update it.
bash
rustup update
To install 'rrdpit' under your user's home directory, use this:
bash
git clone git@github.com:NLnetLabs/rrdpit.git
cd rrdpit
cargo install
If you have an older version of rrdpit installed, you can update via
bash
cargo install -f
You can ask rrdpit for help.
```bash rrdpit --help rrdpit 0.0.2 Dist to RPKI RRDP
USAGE:
rrdpit --https
FLAGS: --help Prints help information -V, --version Prints version information
OPTIONS:
-h, --https
ARGS:
Note that 'clean' is optional. If used rrdpit will try to clean out the target dir, i.e. it will remove unused session id dirs, and unused version directories for delta files which are no longer referenced.
Use this option with care. You do NOT want to use this and accidentally use a
system directory for the --target option. Especially if you run this as root,
which would be ill-advised as well.
Sync the entire ARIN RPKI repository: ```bash
$ mkdir -p tmp/arin $ cd tmp/arin/ $ mkdir source $ rsync -zarvh rsync://rpki.arin.net/repository ./source/ receiving file list ... done ./ arin-rpki-ta.cer arin-rpki-ta/ arin-rpki-ta/5e4a23ea-e80a-403e-b08c-2171da2157d3.cer arin-rpki-ta/arin-rpki-ta.crl arin-rpki-ta/arin-rpki-ta.mft arin-rpki-ta/5e4a23ea-e80a-403e-b08c-2171da2157d3/ ..... .....
sent 158.78K bytes received 11.08M bytes 976.85K bytes/sec total size is 14.25M speedup is 1.27 ```
Now create RRDP files in a target dir: ```bash $ mkdir target $ time rrdpit --https https://rpki.arin.net/rrdp/ \ --rsync rsync://rpki.arin.net/repository/ \ --source ./source/ \ --target ./target/
real 0m0.848s user 0m0.385s sys 0m0.258s ```
Check that all expected files are there, or well, at least the number: ```bash $ find ./source/ -type f | wc -l 7031
$ grep uri ./target/8e142e20-236c-4694-8430-b05693fab150/1/snapshot.xml | wc -l 7031 ```
(note that that uuid is a randomly generated session id, used when the target dir is empty)
```bash $ rm source/arin-rpki-ta.cer $ time rrdpit --https https://rpki.arin.net/rrdp/ \ --rsync rsync://rpki.arin.net/repository/ \ --source ./source/ \ --target ./target/
real 0m1.484s user 0m1.285s sys 0m0.186s
$ find target target target/8e142e20-236c-4694-8430-b05693fab150 target/8e142e20-236c-4694-8430-b05693fab150/1 target/8e142e20-236c-4694-8430-b05693fab150/1/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2 target/8e142e20-236c-4694-8430-b05693fab150/2/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2/delta.xml target/notification.xml
$ cat ./target/notification.xml
$ cat ./target/8e142e20-236c-4694-8430-b05693fab150/2/delta.xml
Note that if you sync again, and there are no changes in the source dir, no deltas will be written:
```bash $ time rrdpit --https https://rpki.arin.net/rrdp/ \ --rsync rsync://rpki.arin.net/repository/ \ --source ./source/ \ --target ./target/
real 0m1.495s user 0m1.292s sys 0m0.190s
$ find target target target/8e142e20-236c-4694-8430-b05693fab150 target/8e142e20-236c-4694-8430-b05693fab150/1 target/8e142e20-236c-4694-8430-b05693fab150/1/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2 target/8e142e20-236c-4694-8430-b05693fab150/2/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2/delta.xml target/notification.xml ```
rrdpit will also perform some sanity checks on the existing RRDP files, and if it finds an issue it will use a new session:
```bash $ find target -type f target/8e142e20-236c-4694-8430-b05693fab150/1/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2/delta.xml target/notification.xml
$ echo "corrupt" > target//8e142e20-236c-4694-8430-b05693fab150/2/delta.xml
$ rrdpit --https https://rpki.arin.net/rrdp/ \ --rsync rsync://rpki.arin.net/repository/ \ --source ./source/ \ --target ./target/
$ find target -type f target/07cfc1ce-e7d9-4bec-8a70-9feb76778700/1/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/1/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2/snapshot.xml target/8e142e20-236c-4694-8430-b05693fab150/2/delta.xml target/notification.xml ```
Optionally you can let rrdpit clean up old files as well: ```bash $ rrdpit --https https://rpki.arin.net/rrdp/ \ --rsync rsync://rpki.arin.net/repository/ \ --source ./source/ \ --target ./target/ \ clean
$ find target -type f target/07cfc1ce-e7d9-4bec-8a70-9feb76778700/1/snapshot.xml target/notification.xml ```
This code can possibly use more testing. And some things can be cleaned up. However, it seems to work well from the testing we have done.
Of course you can create issues, but given that our main effort is directed at Krill for the moment, which includes its own RRDP server, we cannot guarantee that issues will get a high priority. Pull requests may get more mileage ;)