probe-runRuns embedded programs just like native ones
probe-run is a custom Cargo runner that transparently runs Rust firmware on a
remote device.
probe-run is powered by [probe-rs] and thus supports as many devices and probes as
probe-rs does.
cargo run.To install probe-run, use cargo install probe-run.
On Linux, you might have to install libudev and libusb from your package
manager before installing probe-run.
The recommend way to use probe-run is to set as the Cargo runner of your application.
Add this line to your Cargo configuration (.cargo/config) file:
toml
[target.'cfg(all(target_arch = "arm", target_os = "none"))']
runner = "probe-run --chip ${PROBE_RUN_CHIP}"
Instead of ${PROBE_RUN_CHIP} you can write the name of your microcontroller.
For example, one would use nRF52840_xxAA for the nRF52840 microcontroller.
To list all supported chips run probe-run --list-chips.
To support multiple devices, or permit overriding default behavior, you may prefer to set the
${PROBE_RUN_CHIP} environment variable, and set runner (or
CARGO_TARGET_${TARGET_ARCH}_RUNNER) to probe-run.
If you have several probes connected, you can specify which one to use by adding
the --probe option to the runner or setting the ${PROBE_RUN_PROBE} environment
variable with a value containing either ${VID}:${PID} or ${VID}:${PID}:${SERIAL}:
console
probe-run --probe '0483:3748' --chip ${PROBE_RUN_CHIP}
PROBE_RUN_PROBE='1366:0101:123456' cargo run
To list all connected probes, run probe-run --list-probes.
Next check that debug info is enabled for all profiles.
If you are using the cortex-m-quickstart template then this is already the case.
If not check or add these lines to Cargo.toml.
``` toml
[profile.dev]
debug = 1 # default is true; not needed if not already overridden
[profile.release]
debug = 1 # default is false; using true is also OK
```
The cortex-m dependency must be version 0.6.3 or newer.
Older versions are not supported.
Check your Cargo.lock for old versions.
Run cargo update to update the cortex-m dependency if an older one appears in Cargo.lock.
You are all set.
You can now run your firmware using cargo run.
For example,
``` rust use cortexm::asm; use cortexmrt::entry; use rtttarget::rprintln;
fn main() -> ! { // omitted: rtt initialization rprintln!("Hello, world!"); loop { asm::bkpt() } } ```
console
$ cargo run --bin hello
Running `probe-run target/thumbv7em-none-eabi/debug/hello`
flashing program ..
DONE
resetting device
Hello, world!
stack backtrace:
0: 0x0000031e - __bkpt
1: 0x000001d2 - hello::__cortex_m_rt_main
2: 0x00000108 - main
3: 0x000002fa - Reset
When the firmware reaches a BKPT instruction the device halts. The probe-run tool treats this
halted state as the "end" of the application and exits with exit-code = 0. Before exiting,
probe-run prints the stack backtrace of the halted program.
This backtrace follows the format of the std backtraces you get from std::panic! but includes
<exception entry> lines to indicate where an exception/interrupt occurred.
``` rust use cortexm::asm; use rtttarget::rprintln;
fn main() -> ! { // omitted: rtt initialization rprintln!("main"); SCB::set_pendsv(); rprintln!("after PendSV"); loop { asm::bkpt() } }
fn PendSV() { rprintln!("PendSV"); asm::bkpt() } ```
console
$ cargo run --bin exception --release
main
PendSV
stack backtrace:
0: 0x00000902 - __bkpt
<exception entry>
1: 0x000004de - nrf52::__cortex_m_rt_main
2: 0x00000408 - main
3: 0x000005ee - Reset
When the device raises a hard fault exception probe-run will print a backtrace
and exit with non-zero exit code.
You can trigger a hard fault exception with the UDF instruction.
``` rust use cortex_m::asm;
fn main() -> ! { asm::udf() } ```
``` console
$ cargo run --bin hard-fault
stack backtrace:
0: 0x000003e0 - HardFaultTrampoline
$ echo $? 134 ```
NOTE when you run your application with probe-run the HardFault handler,
default or user-defined one, will NOT be executed.
probe-run is part of the [Knurling] project, [Ferrous Systems]' effort at
improving tooling used to develop for embedded systems.
If you think that our work is useful, consider sponsoring it via [GitHub Sponsors].
Licensed under either of
Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be licensed as above, without any additional terms or conditions.