Logitech G213 Keyboard USB Backlight Utility

Introduction

A Rust version of G213Colors

See Commands section below for supported commands.

The last successful command is saved to ~/.g213-cols.json. This will be used if g213-cols is subsequently called with no arguments. This allows the state of the keyboard to be quickly restored.

Installing

As g213-cols needs to be run as root to control the G213 keyboard via USB, the following steps need to be followed to install it correctly.

You will need to ensure you have set up sudo access for some of the following commands.

• Step 1 - Installing - standard cargo install

  • cargo install g213_colours will install g213-cols in ~/.cargo/bin
  • Development
    • Clone the github repository and change directory to it
    • cargo install --path .

• Step 2 - Creating a setuid root version

  • NOTE: g213-cols must be copied to and run from a different location. Otherwise further cargo install steps may fail.
  • Copy the above g213-cols binary to a location in your PATH - eg ~/bin
  • sudo cp ~/.cargo/bin/g213-cols ~/bin
  • sudo strip ~/bin/g213-cols
  • sudo chown root.root ~/bin/g213-cols
  • sudo chmod u+s ~/bin/g213-cols - now this command will run as root

Commands

See X11 colour names for all supported colour names - eg alice blue, lawn green, DarkCyan etc.

Choosing an invalid colour will result in RED being used. You can also use 'random' for a random colour.

| Command | | | ----------------------------------------------------- | ------------------------------------------------------------- | | Set whole keyboard colour | | | g213-cols colour | sets the default 'white' | | g213-cols colour ffff00 | sets the specified hex colour, eg yellow | | | NOTE: 3 digit hex colour conversion - 1af -> 11aaff | | g213-cols colour lawn green | sets the named X11 colour | | g213-cols colour "alice blue" | sets the named X11 colour - as a single argument | | g213-cols colour dark_slate_blue | sets the named X11 colour - underscores become spaces | | g213-cols colour random | sets a random colour | | Set the colour of a specific keyboard region - 1 to 5 | | | g213-cols region 2 [colour] | sets the region to the [colour] as defined above | | Set 'breathe' mode | | | g213-cols breathe 1000 [colour] | sets the breathe time (in ms) for the [colour] | | Set 'cycle' mode | | | g213-cols cycle 1000 | sets the cycle time (in ms) all colours | | Use last successful saved command | | | g213-cols | Runs the last successful saved command from ~/.g213-cols.json |

Abbreviations

| Command | Abbreviation | | ------- | ------------ | | colour | c | | region | r | | breathe | b | | cycle | cy | | help | h or ? |

Todo

• Help is terrible - but it's all here
• Multiple region colours command - g213-cols regions [colour1] [colour2] [colour3] [colour4] [colour5]

Ideas - for others 😄

• Support other Logitech keyboards
• Support other manufacturers