fido2luks

This will allow you to unlock your luks encrypted disk with an fido2 compatible key

Note: This has only been tested under Fedora 31 using a Solo Key, Trezor Model T

Setup

Prerequisites

dnf install cargo cryptsetup-devel -y

Device

``` git clone https://github.com/shimunn/fido2luks.git && cd fido2luks

Alternativly cargo build --release && sudo cp target/release/fido2luks /usr/bin/

CARGOINSTALLROOT=/usr sudo -E cargo install -f --path .

echo FIDO2LUKSCREDENTIALID=$(fido2luks credential) >> dracut/96luks-2fa/fido2luks.conf

set -a . dracut/96luks-2fa/fido2luks.conf

Repeat for each luks volume

sudo -E fido2luks -i add-key /dev/disk/by-uuid/

Test(only works if the luks container isn't active)

sudo -E fido2luks -i open /dev/disk/by-uuid/ luks-

```

Dracut

``` cd dracut

sudo make install ```

Grub

Add rd.luks.2fa=<CREDENTIAL_ID>:<DISK_UUID> to GRUB_CMDLINE_LINUX in /etc/default/grub

Note: This is only required for your root disk, systemd will try to unlock all other luks partions using the same key if you added it using fido2luks add-key

grub2-mkconfig > /boot/grub2/grub.cfg

I'd also recommend to copy the executable onto /boot so that it is accessible in case you have to access your disk from a live system

mkdir /boot/fido2luks/ cp /usr/bin/fido2luks /boot/fido2luks/ cp /etc/fido2luks.conf /boot/fido2luks/

Test

Just reboot and see if it works, if thats the case you should remove your old less secure password from your luks header:

```

Recommend in case you lose your authenticator, store this backupfile somewhere safe

cryptsetup luksHeaderBackup /dev/disk/by-uuid/ --header-backup-file luksbackup

There is no turning back if you mess this up, make sure you made a backup

fido2luks -i add-key --exclusive /dev/disk/by-uuid/ ```

Addtional settings

Password less

Remove your previous secret as described in the next section, incase you already added one.

Open /etc/fido2luks.conf and replace FIDO2LUKS_SALT=Ask with FIDO2LUKS_SALT=string:<YOUR_RANDOM_STRING>

Import the new config into env:

set -a . /etc/fido2luks.conf

Then add the new secret to each device and update dracut afterwards dracut -f

Removal

Remove rd.luks.2fa from GRUB_CMDLINE_LINUX in /etc/default/grub

``` set -a . fido2luks.conf sudo -E fido2luks -i replace-key /dev/disk/by-uuid/

sudo rm -rf /usr/lib/dracut/modules.d/96luks-2fa /etc/dracut.conf.d/luks-2fa.conf ```