Barbecue thermometer to Homie bridge

cloudbbq-homie is a service which runs on a Linux device to connect to a CloudBBQ or iBBQ Bluetooth BBQ thermometer, and send its readings to an MQTT broker following the Homie convention. This allows you to control it via OpenHAB and other home automation software, log readings to InfluxDB with homie-influx, or integrate with various other compatible tools.

This is not an officially supported Google product.

Usage

1. Copy cloudbbq-homie.example.toml to cloudbbq-homie.toml and edit it to configure your MQTT broker and other details. The comments there should explain what the fields do.
2. Turn on your BBQ thermometer.
3. Run cloudbbq-homie from the same directory as the config file.
4. Try connecting to your MQTT broker with a Homie controller such as HoDD to see your probe values. Or use homie-influx to store the readings in InfluxDB so you can draw charts with Grafana.

License

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

See the contributing guidelines for more details.