Bevy Client Server Events

Bevy Client Server Events Latest version Documentation MIT Apache

Simple event-based client-server networking library for Bevy.

Easily send bevy events to/from a client/server.

Builds off of the renet/bevy_renet library and attempts to simplify the configuration and management of types to be sent through a network.

Goals: - Simplified network setup and configuration - Easily send any types to/from a client/server

Todo: - Support secure authentication

Plugins

This library comes with 6 different plugins.

ClientServerEventsPlugin

This plugin must be added to utilize any of the other plugins.

The endpoint type (Client or Server) and channels are specified in this plugin configuration.

Here's an example of a server with 3 available channels.

rust,ignore App::new() .add_plugins(ClientServerEventsPlugin::default_with_channels( EndpointType::Server, 0..3 )); // Server with three channels (IDs: 0, 1, 2)

SendToServerPlugin

Add this client plugin (one or more times) to signal that a specific type will be sent to a server on a particular channel.

rust,ignore App::new() // .. .add_plugins(SendToServerPlugin::<0, CustomType1>::default() // CustomType1 will be sent to the server on channel 0. .add_plugins(SendToServerPlugin::<1, CustomType2>::default() // CustomType2 will be sent to the server on channel 1. // ..

Inside your systems, you can use events to send CustomType1 and CustomType2 to the server:

rust, ignore fn update( mut send_custom_type1: EventWriter<SendToServer<CustomType1>>, mut send_custom_type2: EventWriter<SendToServer<CustomType2>>, ) { send_custom_type1.send(SendToServer { content: CustomType1 { ... }}); // ... }

ReceiveFromServerPlugin

Add this client plugin (one or more times) to signal that a specific type will be received from the server on a particular channel.

rust,ignore App::new() // .. .add_plugins(ReceiveFromServerPlugin::<0, CustomType>::default() // CustomType will be sent to the server on channel 0. // ..

Inside your systems, you can use events to receive CustomType from the server:

rust, ignore fn update( mut receive_custom_type: EventReader<ReceiveFromServer<CustomType>>, ) { for ReceiveFromServer { content } in receive_custom_type.iter() { // content is our CustomType. // ... } }

SendToClientPlugin and SendToClientsPlugin

Add this server plugin (one or more times) to signal that a specific type will be sent to the client on a particular channel.

rust,ignore App::new() // .. .add_plugins(SendToClientPlugin::<0, CustomType>::default() // CustomType will be sent to clients on channel 0. // ..

Inside your systems, you can use events to send CustomType to clients:

rust, ignore fn update( mut send_custom_type: EventWriter<SendToClient<CustomType>>, ) { let client_id = // ... send_custom_type.send(SendToClient { client_id, content: CustomType { ... }}); }

SendToClientsPlugin works the same way except that each message is boadcast to all clients:

```rust,ignore App::new() // .. .add_plugins(SendToClientsPlugin::<1, CustomType>::default() // CustomType will be sent to all clients on channel 1. // ..

fn update( mut sendcustomtype: EventWriter>, ) { sendcustomtype.send(SendToClients { content: CustomType { ... }}); } ```

ReceiveFromClientPlugin

Add this server plugin (one or more times) to signal that a specific type will be received from clients on a particular channel.

rust,ignore App::new() // .. .add_plugins(ReceiveFromClientPlugin::<0, CustomType>::default() // CustomType will be received from clients on channel 0. // ..

Inside your systems, you can use events to receive CustomType from clients.

rust, ignore fn update( mut receive_custom_type: EventReader<ReceiveFromClient<CustomType>>, ) { for ReceiveFromClient { client_id, content } in receive_custom_type.iter() { // content is our CustomType. // ... } }

Channels

Channels (from renet) allows you to configure memory usage as well as the send type (Unreliable, ReliableOrdered, or ReliableUnordered). The default channel is ReliableOrdered with a resend time of 300ms.

Channels are configured when adding the ClientServerEventsPlugin. This configuration will determine the channel IDs available for the application. Then you can tie channels to certain types by adding the appropriate plugins: - SendToServerPlugin::<channel_id, MyType>::default() - ReceiveFromServerPlugin::<channel_id, MyType>::default() - SendToClientPlugin::<channel_id, MyType>::default() - SendToClientsPlugin::<channel_id, MyType>::default() - ReceiveFromClientPlugin::<channel_id, MyType>::default()

See examples/clients_example.rs for different channel configuration options.

Each channel can only send and receive one type. While not recommended, the types can be distinct (ie: sending TypeA and receiving TypeB on channel 0 is fine), but you can not overload sending or receiving with more than one type (ie: sending TypeA and TypeB on channel 1 will cause deserialization issues).

The clients and server channel/type bindings must match (If client is sending CustomType on channel 0, the server must receive CustomType on channel 0 as well).

The simplest approach is to assign types to channels across your clients and server code regardless of sending or receiving (ie: TypeA == channel 0, TypeB == channel 1, TypeC == channel2, etc).

This was the intention for the design of this library (getting rid of channel IDs entirely), but I haven't yet figured out how to enforce that with the rust compiler.

Examples

See the examples/ping_server.rs and examples/ping_client.rs files for a simple ping-pong example.

In one terminal session: cargo run --example simple_server.rs

In another terminal session: cargo run --example simple_client.rs

With the client window in focus, hit ENTER to send a Ping. The server will respond with a Pong.

Overview

Assuming you have the following types in your project:

```rust,ignore

[derive(Event, Serialize, Deserialize)]

pub struct MessageForServer;

[derive(Event, Serialize, Deserialize)]

pub struct MessageForClient; ```

Here's a stripped down example of a client:

```rust,ignore // ... App::new() // ... .addplugins(ClientServerEventsPlugin::defaultclient()) // Only one channel with ID of 0 by default. .addplugins(SendToServerPlugin::<0, MessageForServer>::default()) // Use channel 0 for sending a MessageForServer. .addplugins(ReceiveFromServerPlugin::<0, MessageForClient>::default()) // Use channel 0 for receiving a MessageForClient. // ... // ...

fn connect(mut connecttoserver: EventWriter) { connecttoserver.send(ConnectToServer::default()); // Connects to 127.0.0.1:5000 by default. }

fn update( mut sendmessage: EventWriter>, mut messagereceived: EventReader>, ) { // ... sendmessage.send(SendToServer { content: MessageForServer }); // ... for ReceiveFromServer { clientid, content } in message_received.iter() { // Do something with content (MessageForClient). // ... } } ```

And a stripped down example for a server:

```rust,ignore // ... App::new() // ... .addplugins(ClientServerEventsPlugin::defaultserver()) // Only one channel with ID of 0 by default. .addplugins(ReceiveFromClientPlugin::<0, MessageForServer>::default()) // Use channel 0 for receiving a MessageForServer. .addplugins(SendToClientPlugin::<0, MessageForClient>::default()) // Use channel 0 for sending a MessageForClient. // ... // ...

fn setup(mut startserver: EventWriter) { startserver.send(StartServer::default()); // Binds to 127.0.0.1:5000 by default. }

fn update( mut messagereceived: EventReader>, mut sendmessage: EventWriter>, ) { for ReceiveFromClient { clientid, content } in messagereceived.iter() { // Do something with content (MessageForServer). // ... } // ... send_message.send(SendToServer { content: MessageForClient }); // ... }

```

Bevy Compatibility

|bevy|bevyclientserver_events| |---|---| |0.11|0.1|