AMD graphic card voltage manager

This tool can be used to overclock you AMD graphic card on Linux

Install

bash cargo install amdvold

Usage

Available commands:

• setup-info - prints information how to enable voltage management on Linux (see Requirements)
• print-states - prints current card states
• change-state - change card voltage states
• apply-changes - apply changes

Changing states

Positional arguments: * index Profile number * module Either memory or engine * frequency New GPU module frequency * voltage New GPU module voltage

Optional arguments: * -a, --apply-immediately Apply changes immediately after change

Example:

bash amdvold 1 engine 1450MHz 772mV

Requirements

To enable AMD GPU voltage manipulation kernel parameter must be added, please do one of the following:

• In GRUB add to "GRUBCMDLINELINUX_DEFAULT" following text "amdgpu.ppfeaturemask=0xffffffff", example:

  GRUBCMDLINELINUX_DEFAULT="loglevel=3 cryptdevice=/dev/nvme0n1p3:cryptroot amdgpu.ppfeaturemask=0xffffffff psi=1"

  Easiest way is to modify "/etc/default/grub" and generate new grub config.

• If you have hooks enabled add in "/etc/modprobe.d/amdgpu.conf" to "options" following text "amdgpu.ppfeaturemask=0xffffffff", example:

  options amdgpu sisupport=1 ciksupport=1 vmfragmentsize=9 audio=0 dc=0 aspm=0 ppfeaturemask=0xffffffff

  (only "ppfeaturemask=0xffffffff" is required and if you don't have "options amdgpu" you can just add "options amdgpu ppfeaturemask=0xffffffff")